Pink has been a popular colour in interior design for centuries. From elegant Rococo rooms to mid-century modern designs, pink has stood the test of time. When chosen thoughtfully and combined with the right elements, it can create a timeless and classic look.
There are so many shades of pink to choose from, and you can easily find one that resonates with your personal style. Whether you prefer soft, muted pinks or bold and vibrant ones, there’s a pink shade that can help you express yourself and create a space that truly feels like your own.
Farrow & Ball
Pink Ground No. 202
Sulking Room Pink No. 295
Pink Ground: This dusty pink started out as a delicate wallpaper background which was often requested as a paint colour. Pink Ground, with its large dose of yellow pigment, now creates the softest blush of colour for a warm and soothing finish that doesn’t feel sugary. Rather than contrasting with a bright white, try pairing with its Complementary White, Wimborne White, or the warmer shade of Great White on the woodwork for a unique look in your home.
Sulking Room Pink: Not to be seen as overtly pink, but rather a muted rose with enormous warmth, its powdery feel makes it incredibly soft and easy to use with complementary tones. Sulking Room Pink is evocative of the colours so often used in boudoirs, a room named after the French “bouder” – to sulk.
Mylands
Floris No. 27
FTT-006 Shocking Pink
Floris™ No.27 is a vibrant and sophisticated pink, pretty and feminine without being too sweet. It uses an absorbing umber shade to bring depth and beauty. Its blush tone is perfect for creating an appealingly romantic environment, and is soft, not at all overpowering
FTT-006 Shocking Pink: A strong mix of red and magenta, this paint walks the line between red and dark pink. A slightly darker and less feminine alternative to FTT-005™, it can provide dramatic energy with plenty of character.
Little Greene Paint Company
Blush No. 267
Masquerade No. 334
Blush: This muted, rosy pink paint colour creates a strong statement without being overbearing. It combines well with related darks such as Dark Lead Colour in a calming bathroom scheme, or with deep greens like Ambleside for a classic pink and green pairing.
Masqurade: With its delicate, powder-like hue, Masquerade – alongside the diluted versions of it – offers an alluring, natural undertone that is as ‘at-home’ in the bedroom as in the ballroom.
Dulux Trade Heritage
Potters Pink
DH Blossom
Potters Pink: A soft pink, evocative of fresh alabaster plaster, Potters Pink paint is one of the range of pale tones in the luxury Heritage Paint range from Dulux
DH Blossom: A soft mid pink colour, DH Blossom paint is one of the range of mid tones in the luxury Heritage Paint range from Dulux
First, thoroughly clean the surface using Zinsser Universal Degreaser & Cleaner, rinse and allow to dry. Next, apply Zinsser Mould Killer and Remover directly to the surface to remove unsightly dark mould stains from tiles, wood, plaster and wallpaper.
After priming with stain-blocker Zinsser B-I-N® AQUA, simply apply two coats of Zinsser PermaWhite to prevent mould and mildew. PermaWhite is the ultimate paint for any room with high humidity or poor air circulation.
Zinsser Universal Cleaner & Degreaser, Mould Killer & Remover, B-I-N® AQUA and Zinsser PermaWhite (Interior) combine to form the ultimate solution for tackling mould, fungus and algae on any interior surface.
Zinsser Mould Killer& Remover has a fungicidal formula that removes mould stains from internal surfaces including tiles and wallpaper. Ideal for use in bathrooms, kitchens and other areas of high humidity.
Zinsser Perma-White (Interior)is a mould resistant interior paint, with a unique biocide designed to protect against fungal degradation. Available in both Matt and Satin finishes. Tintable to any BS4800, RAL or NCS colour.
Zinsser Universal Degreaser & Cleaner is a water-based detergent that is colour fast, fabric safe and removes tough stains quickly and effectively from many surfaces.
B-I-N® AQUA is a ground-breaking water-based primer, sealer, stain killer and odour blocker. With exceptional adhesion and ultra-low odour, the advanced formula contains only trace elements of VOCs.
Thermoguard Thermocoat WI is a water-based intumescent paint system providing fire resistance to structural steel and cast iron that may be applied by brush, roller or airless spray. A compatible decorative overcoat system ensures the system will enhance the building’s architectural and design features.
Thermocoat WI is specially formulated for use on structural Universal Beams and Columns, Channels, T-sections, Angles etc,
Thermocoat WI is a low-odour, water-based coating, making it user and environmentally friendly.
The range of topcoats are either water-based or 2010 compliant and safe to use in accordance with manufacturer’s instructions.
Water based Intumescent for structural steel
For 30 mins protection: 1 thick coat – 2.5kg 4 linear m, 5kg 8 linear m, 20kg 32 linear m – if in any doubt please contact us.
For 60, or 90 minutes protection: contact us for further advice specific to your project
Key Benefits of Thermocoat WI Steel Paint:
Thermocoat WI is a low-odour, water-based coating, making it user and environmentally friendly.
The range of topcoats are either water-based or 2010 compliant and safe to use in accordance with manufacturer’s instructions.
It can be used internally and externally as follows:
In dry internal environments: Apply Thermocoat WI in accordance with Thermoguard film thickness schedule to achieve 30, 60, 90 minutes.
Visible or occasional modest damp internal areas: Also apply 1 good coat Thermoguard Flame Retardant Paint
Wet or External Under Cover: Apply 2nd coat Flame Retardant paint
Thermocoat WI can be topcoated with Flame Retardant gloss, eggshell, WB satin, WB matt BS 4800 & RAL colours
Intended Use:
Thermocoat WI is optimised to protect I, channel, shaped steel and hollow bracing. It is a water-based intumescent paint system providing fire resistance to structural steel and cast iron of up to 90 minutes with a minimum number of coats. A compatible decorative overcoat system ensures the system will enhance the building’s architectural and design features.
How it works:
The heat of a fire triggers a catalytic reaction, causing the expansion of an insulating char layer up to 50 times the paint thickness. This layer keeps the steel below its critical temperature, thus maintaining the structural integrity of the building.
Pack Sizes:
Available in 20kg, 5kg, 2.5kg
Coverage:
Prior to application the contractor should contact Thermoguard’s Technical Department and obtain a basecoat application schedule or follow on can guidance. Do not overspread as this will compromise the system and result in non-compliance and a failure to be certified
Overcoating with Flame Retardant finish: minimum 10 hours
Spray Application Surface Dry: minimum 4 hours
Recoat: minimum 10 hours
Overcoating with Flame Retardant finish: minimum 48 hours
Preparation:
Steel and cast iron should be free from rust and millscale and primed with Thermoguard Steel Fire Paint Primer to 75 microns DFT ( or alternative good quality anti-corrosive primer compatible with intumescent paints) in accordance with manufacturer’s instructions. Treat galvanised surfaces with “T” wash/Mordant solution & prime with zinc phosphate or other primer for steel.
Application Conditions:
Maximum Relative Humidity 80%
Minimum ambient temperature 4°C
Minimum Steel Temperature 3°C above Dew Point
Application:
Thermocoat WI may be applied by brush, roller or airless spray. To achieve the best finish in the shortest time, spray application is recommended.
Prior to application the contractor should contact our technical department and obtain a basecoat application schedule.
To assist correct application in accordance with this schedule, a wet film gauge will be supplied with the order. Further wet film gauges will be provided on request.
Maximum wet film thickness per brush coat – 800 microns
Maximum wet film thickness per spray coat – 1400 microns
Spray:
Spray Equipment- Airless Spray Pump
Use equipment recommended by manufacturer for the application of high viscosity intumescent paints.
Filter size 30 mesh. 10mm hose 3/8” diameter with no whip end.
Tip Size 319, 321, 419, 421
Care should be taken to clean filters regularly. Cleaning should be undertaken with water.
Fire Certification:
Thermoguard issue a Certificate of Supply on request for each specified project for insurance, Fire and Building Control Authority and Client Records.
Please contact us to obtain this after applying the product.
Thermoguard Thermocoat WO Steel Paint
THERMOCOAT WO INTUMESCENT PAINT FOR STRUCTURAL STEEL AND CAST IRON
Thermoguard Thermocoat WO is a water-based intumescent paint system providing fire resistance to structural steel and cast iron that may be applied by brush, roller or airless spray. A compatible decorative overcoat system ensures the system will enhance the building’s architectural and design features.
Thermocoat WO is specially formulated for use on structural Hollow Sections as shown below,
Thermocoat WO is a low-odour, water-based coating, making it user and environmentally friendly.
The range of topcoats are either water-based or 2010 compliant and safe to use in accordance with manufacturer’s instructions.
Water based Intumescent for structural steel
For 30 mins protection: 1 thick coat – 2.5kg 4 linear m, 5kg 8 linear m, 20kg 32 linear m – if in any doubt please contact us.
For 60, or 90 minutes protection: contact us for further advice specific to your project
Key Benefits:
Thermocoat WO is a low-odour, water-based coating, making it user and environmentally friendly. The range of topcoats are either water-based or 2010 compliant and safe to use in accordance with manufacturer’s instructions. Dry Internal: Apply Thermocoat WO in accordance with Thermoguard film thickness schedule to achieve 30, 60, 90 minutes. Visible or occasional modest damp internal areas: Also apply 1 good coat Thermoguard Flame Retardant Paint
Wet or External Under Cover: Apply 2nd coat Flame Retardant paint
Thermocoat WO can be topcoated with Flame Retardant gloss, eggshell, WB satin, WB matt BS 4800 & RAL colours
Intended Use:
Thermocoat WO is optimised to protect hollow sections and bracing. It is a water-based intumescent paint system providing fire resistance to structural steel and cast iron of up to 90 minutes with a minimum number of coats. A compatible decorative overcoat system ensures the system will enhance the building’s architectural and design features.
How it works:
The heat of a fire triggers a catalytic reaction, causing the expansion of an insulating char layer up to 50 times the paint thickness. This layer keeps the steel below its critical temperature, thus maintaining the structural integrity of the building.
Pack Sizes:
Available in 20kg, 5kg, 2.5kg
Coverage:
Prior to application the contractor should contact Thermoguard’s Technical Department and obtain a basecoat application schedule or follow on can guidance. Do not overspread as this will compromise the system and result in non-compliance and a failure to be certified
Overcoating with Flame Retardant finish: minimum 10 hours
Spray Application Surface Dry: minimum 4 hours
Recoat: minimum 10 hours
Overcoating with Flame Retardant finish: minimum 48 hours
Preparation:
Steel and cast iron should be free from rust and millscale and primed with Thermoguard Steel Fire Paint Primer to 75 microns DFT ( or alternative good quality anti-corrosive primer compatible with intumescent paints) in accordance with manufacturer’s instructions. Treat galvanised surfaces with “T” wash/Mordant solution & prime with zinc phosphate or other primer for steel.
Application Conditions:
Maximum Relative Humidity 80%
Minimum ambient temperature 4°C
Minimum Steel Temperature 3°C above Dew Point
Application:
Thermocoat WO may be applied by brush, roller or airless spray. To achieve the best finish in the shortest time, spray application is recommended. Prior to application the contractor should contact Thermoguard’s Technical Department and obtain a basecoat application schedule. To assist correct application in accordance with this schedule, a wet film gauge will be supplied with the order. Further wet film gauges will be provided on request.
Maximum wet film thickness per brush coat – 800 microns
Maximum wet film thickness per spray coat – 1400 microns
Spray:
Spray Equipment- Airless Spray Pump
Use equipment recommended by manufacturer for the application of high viscosity intumescent paints.
Filter size 30 mesh. 10mm hose 3/8” diameter with no whip end.
Tip Size 319, 321, 419, 421
Care should be taken to clean filters regularly. Cleaning should be undertaken with water.
Fire Certification:
Thermoguard issue a Certificate of Supply on request for each specified project for insurance, Fire and Building Control Authority and Client Records.
